New Zealand Am 2 SY cable gland help

[Adam_glover18]

Hi there good evening chaps.
just wondering if anyone could help me out with some info on terminating SY cable using the proper glands. I have my am2 next week and although I have done the pre am2 and watched the video on YouTube I'm still a little confused. Because on the video the guy says to use one washer then the braid then the next washer and the banjo. Where on the training day they showed us to put the gland on then banjo push through into the back box then out the washers on and locknut. Which one is correct ?

Thanks for reading any help would be appreciated and finally sorry for the explanation

 

[Adam_glover18]

Here's the link for the video if this helps at all The Practical Skills Series : Cable Termination - SY Flex - YouTube

 

[telectrix]

from your post, i would say that the video was the correct procedure.

 

[Adam_glover18]

Thanks telectrix I thought it was when he was showing us cheers pal

 

[Knobhead]

Both methods are correct. The gland, washers and locknut are brass.

One method is aesthetically more pleasing on the eye. But that’s the only thing between them.

 

[Adam_glover18]

Thanks tony so either ways fine so I can't go wrong lol