-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the UK Electrical Forum - UK Electricians Forums > Electrical Forum for UK Electrical Rules, Regulations and UK Laws. Electrical Theories, Wiring Diagrams and More. DIY and Professional Electricians are Welcome..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
Forum Prefix Filter
- Sticky
Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..
Rules....No Offensive...
- Sticky
This is for the people still in or has just left their electrical education or for those of us that need a refresher in domestic earthing...
- Sticky
So this has been posted in the following forum categories:-
American Electrical Forum -...
- Sticky
Just setting up a new sticky thread that unlike the dodgy trade pics thread is focused on showing the result of failures in electrical...
- Locked
- Sticky
Beware a little long.
I served an electrical apprenticeship a long time ago, then went back to full time education immediately moving away from...
Good morning guys
Was looking for advice with regards to installing an outdoor consumer unit. Customer is looking for power to be installed from...
Sorry if this is a stupid question.
We have a waste water pump in our first floor flat. The water pump failed and stopped draining water from the...
Job that was on the to do list, got round to it the other day. Three gang switch with a few lights connected together in the same switch.
Surveyed...
Hi all
I am after some advice on an installation I have coming up.
Its a new TP+N circuit in SWA (13m run clipped direct) for a 22kW Tesla wall...
Hi all I have an outdoor wall light which is bolted from behind. Then a decorative nut threaded on the front.
As I push the plate on the bolt...
Has anyone moved on to an AP or SAP role, currently JIB Graded Approved Maintenance Electrician/Electrical Fitter. HNC Elec&Electronic, BTEC...
I went to see ABBA Voyage recently and the show was just mind blowing, staging, lighting, sound - just everything!
I was talking about it last...
Quick question here.
Have recently completed my level2 2365, and have an interview at a college locally for a advanced apprenticeship. It will...
I have a Garo Entity Pro and my phone cannot find the Garo-CU to connect my wifi to the Garo app so at the moment it is charging at 16A and I...
Does a SPD need a dedicated way?
I need an extra way in this unit for a 3 phase car charger
As you can see its a small unit with no extra...
I seem to remeber being taught /told that when doing an eicr you should test when possible to the regs that applied at the time of installation...
I've just been fettling some 50 year old 2L2.5 pyro (MICC) to relocate a plug socket. I probably bent the cable a little more than I should have...
Rocky’s pub in Spain… like a Wetherspoons in the UK
How rough is that single cabling to external Lamp Column about 10 like this
Code Please😂
Hey all, I'm brand new to this world, im currently studying with TPA college to become an electrician just wondering if anyone has any advice for...
A friend of mine got a 2nd hand coffee machine (OK, probably 3rd or 4th...) for use in a charity cafe and it has problems.
First problem is no...
well this will make you chuckle,this morning sent a customer an email regarding some work they require,and a couple of hours in phone call ,now...
I know how to fulfil IEEE wiring but is it ok to use 20mm corrugated conduit through the dwelling wall or is it rigid white conduit with the usual...
Not sure what to do here. I am wiring detectors for someone, boiler is in a small cupboard in the bathroom. Too small to fit the detector as it...
Some electric tankless shower water heaters have inbuilt ELCB. Are they better than Triton water heaters which don't have it ? and does Triton...
Looking through the fire-rated downlights out there on the market, Integral Evofire claims its canless design would let the heat off and hence...
Hi team!
At work, when the need arises, I use Eplan for electrical drawings but I am soon to undertake some side projects and need to put some...
I've finally found a customer rich enough to want a Zappi, and by heck it's so much nicer to install than the budget brands!
But I wonder if...
Hi, Got a new build house which has 5 bathrooms and there looking to put 10.8KW electric showers in each bathroom/ensuite. Its a Passivhaus and...
I have never installed downlights in a soffit before and have been asked to do it.
New build house. Is it a case of drilling the holes in the...
Hi all new to the forum
Learning the trade as an improver, trying to get my head round something.
When taking a feed from the light switch to...
Hi. The question is..... can saturated ground affect earth resistivity testing equipment?
Some days there's an unacceptable earth reading, another...
Hi, I'm Dan.
Sorry people I've been so busy. I've has some health issue that are all sorted now. I haven't been on the forum as much but that's...
Hi
Doing my first Inverter and Battery install on a domestic property having just completed my EESS course with LCL.
Question is how do I...
Hi I currently on a job where the garage is having an office built above it with solar panels installed on the roof.
I have ran a 16mm 3 core...
I am decorating our bedroom which only has 1 double socket in it. We have been using multiple gang sockets which are untidy and a trip risk, so I...
Hope someone can help, ran 3 spotlights and double switch all wired with 1.5mm twin and earth cable from my upstairs bedroom to switch ceiling...
I'm after advice on how best and safely to do a friends Fuseboard upgrade.
Current setup is a Wylex 6 Way board with MCBs of 2x 6A, 2x 32A and 30A...
Hi. Can somebody please advice what to do next or should I do anything next or just leave that cable as it is?
Just bought the house and found a...
Hi Guys
I seem to have an issue with voltage coming back from a QTX 15 pa I was getting a lot of hum (I have a pair and confirmed it's the same on...
I have an new set of circs here...
Landlord in Cyprus
EICR needed in empty flat.
No credit on meter. Need power for Ze (TNCS) and RCD test at...
I haven't seen a lot of discussion on this subject and have questions pertaining to isolation where TN earthing is present and any peculiarites...
A few years ago i fitted some plain warm white LED tape, inside an alu profile around a customers bedroom. Sourced from YESSS at the time...
Hi,
I am Currently in the process of building an extension and my builders will shortly be getting their electricians to commence the first fix...
Hi just wondering if someone can help me.
I have an rcbo that keeps tripping but only when the fly earth and neutral lead on the bars it trips...
Hello everyone,
Hope you're all well.
I'm carrying out an overall/global insulation resistance test on a newly wired 3 phase installation we did...
So I know why it is done, where it is done and how it’s done, but I’m yet to see a scenario where there is shock danger in a typical bathroom in a...
I sorted the fault fairly quickly as it happens but only because I'd come across it once before and at the time a few people said it couldn't...
Hi,
I'm looking to install a new bathroom extractor fan in my bathroom as I have a windowless bathroom and the current one I have installed in...
Hello All. I'm quite new to this game and gaining experience, but going well in the main.
My customer wants to feed a Hob ( on island in centre...
Hi all,
I needed to replace an MCB for an electric shower with a different rating, it's an older Loadstar consumer unit, and crabtree told me word...
Hi guys,
I've achieved my NVQ Level 3, 18th edition and 2391-52. Looking to go off by myself, work comprising all of domestic so signing off work...
Hi all, I have an Economy 7 storage heater Dimplex CXL24N - 3.4kW Storage Heater + Convector ( there not available anymore) that dos'nt work and...
Hi, sorry if this has already been discussed or is in the wrong place.
Im wondering if anyone has come across a domestic EV charger where the ct...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
External Consumer UnitThere are also stainless steel options in that range and not too expensive (comparatively).
- Latest: nicebutdim
-
Best certification softwarehttp://www.tysoft.co.uk/easycert.htm I have used this software for years and find it excellent...- Latest: SparkySy
-
Dodgy trade pictures for your amusement! - 1 Million Views!Looks a bit flip floppy to me.... are they cooking sole(s) on a griddle?
- Latest: ipf
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.