- Reaction score
- 0
Hi, just wondering if I have a cable passing through "100mm insulation at 2 points", do I use the correction factor of 100mm at 0.78 or 200 at 0.63
-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
- Thread starter apprenticesparky5
- Start date
Discuss Cable Calculations for Thermal Insulation Passing Through 2 Points. in the USA Electrical Forum area at ElectriciansForums.net
Reply to Cable Calculations for Thermal Insulation Passing Through 2 Points. in the USA Electrical Forum area at ElectriciansForums.net
Similar Threads
Hi All
I wanted to ask a question about the reference method.
Passing wiring through holes made at 0.2-0.4 of the joist span.
The cables passes...
Hello All,
I have just found out that a family member who is having some Building work done has been advised to insulate above the Kitchen...
Hi there
I am struggling with the following calculation.
4mm Ring Final Circuit,
In = 32A
Cg - group of 6 with a correction factor of 0.57
Ci -...
Hi,
I have two questions about domestic wiring In Ireland
1. Should conduit be used when passing multiple T&E cables (2.5mm) through a garage...
Hi, I am currently doing a level 2 (2365). We have been doing trunking factors and I am not sure about if you need to apply the 45% space...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
Dodgy trade pictures for your amusement! - 1 Million Views!At a minimum , but anything else ?
- Latest: Mikegh
-
The big difference in the electric terminology and installation regulations and practice in each country!rubbish. if i see a measurement in inches, i can visualise it. if in cm, then i need to work out...- Latest: telectrix
-
Good Morning Thread - Come say good morning, tell us what you've got on today. :)Who in the forum would you class as Bashful?- Latest: Spoon
USA Electrical Advice
Welcome to the USA Electrical Forum at ElectriciansForums.net. The friendliest electrical
forum online. General electrical questions and answers can be found in the electrical forum.
UK Electrical Forum
This is the main UK Electrical Forum at ElectriciansForums.net. Electrician State Laws for Electrics and Electricals may differ on a state-by-state basis. American questions and answers can be found in our UK electrical forum.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.