Steel conduit in tight spaces

[freddo]

Barton Conduit list 2 flanged couplers, one supplied with a lead washer, the other with a neoprene washer. I've only ever seen the ones with a lead washer though.

 

[JosephandAmber]

Good points re earth continuity. In my case, I'm attaching to plastic outdoor sockets. still, very hard to come by flanged couplers with rubber washers.

I do also find it weird how you can't find rubber gaskets for tees or inspection elbows. You'd think they are equally prone to water ingress as a BESA box, for which gaskets are easily available.

 

[freddo]

Unfortunately electrical installation components are available in only a limited range of styles and sizes, many less common items are very difficult to get hold of. If you go to America you can get anything you want from the local DIY store. Most of the items in that link look far superior to the junk we have available here.

 

[ipf]

I do also find it weird how you can't find rubber gaskets for tees or inspection elbows. You'd think they are equally prone to water ingress as a BESA box, for which gaskets are easily available.

Get some box gaskets and cut them to suit.
Good scissors and a bit of practice.
I always use box tees and angles anyway with natural bending, very occasionally elbows, due to lack of room.

 

[JosephandAmber]

Unfortunately electrical installation components are available in only a limited range of styles and sizes, many less common items are very difficult to get hold of. If you go to America you can get anything you want from the local DIY store. Most of the items in that link look far superior to the junk we have available here.

https://www.homedepot.com/b/Electrical-Electrical-Boxes-Conduit-Fittings-Conduit-Fittings/Galvanized-Steel/N-5yc1vZbohkZ1z0ugnq?experienceName=default&Nao=48&Ns=None&storeSelection=2408,2414,2409,2407,2404

Wow! I can't understand why we don't have the same range available in Europe/UK. Some very handy bits there.

 

[davesparks]

https://www.homedepot.com/b/Electrical-Electrical-Boxes-Conduit-Fittings-Conduit-Fittings/Galvanized-Steel/N-5yc1vZbohkZ1z0ugnq?experienceName=default&Nao=48&Ns=None&storeSelection=2408,2414,2409,2407,2404

Wow! I can't understand why we don't have the same range available in Europe/UK. Some very handy bits there.

Which bits do you think would be useful in the UK?
I can't see much there that either there isn't an equivalent available here or is of much use here.

There are some fittings which used to be common in the UK but don't seem to be widely available any more, if at all. I often want tangent boxes for surface work.

 

[pc1966]

Which bits do you think would be useful in the UK?
I can't see much there that either there isn't an equivalent available here or is of much use here.

There are some fittings which used to be common in the UK but don't seem to be widely available any more, if at all. I often want tangent boxes for surface work.

I don't think I have seen an offset nipple (at least in conduit).

Is this the sort of tangent box you mean?

Galvanized Tangent Tee Box 20mm CBT320G | J Harries Ltd

jharries.co.uk

 

[davesparks]

I don't think I have seen an offset nipple (at least in conduit).

Is this the sort of tangent box you mean?

Galvanized Tangent Tee Box 20mm CBT320G | J Harries Ltd

jharries.co.uk

That's exactly the boxes I've tried to get before, it seems my wholesaler need to look a little harder next time!