Teeside HNC Electrical and Electronic Engineering

[GIZZY]

Hi guys, looking to take my next module, i'm tempted to go with DCS. so far i have completed 5 out of 8 so i have two more modules and then my project to do.

modules done: APH, DADC, EEP, ES and AME.

Kind Regards

Gizzy

 

[Troy22]

Now looking at DCS and or EA 2 to go

 

[E&IEngineer]

Hi im upgrading my hnc to hnd.
for hnd ive done DCS, EM, Mechatronics, safety engineering
in process of ESD finding it difficult

 

[AyresomeBoro]

Finally submitted EEP 3!

I now need to choose my final optional unit before the Project.

What is the easiest optional unit other than DCS so I can get it over with ASAP?


Cheers!

 

[Jregis94]

Hi guys,

I just finished my EEP module and managed to get a distinction overall. The telephone interview was a lot easier than I thought, tutor actually congratulated me on my distinction. If I can help anyone out get in touch, PM me. Thanks.

Hello mate I have been stuck on the EEP Module for quite some time now, I have made a start but was just wondering if I could get you to check to see if I’m on the right track as don’t want to submit it and get a wrong mark
[automerge]1567268019[/automerge]

Finally submitted EEP 3!

I now need to choose my final optional unit before the Project.

What is the easiest optional unit other than DCS so I can get it over with ASAP?


Cheers!

Lighting unit is easy

 

[Dan]

Christ, this thread is big. Why have I never seen this one before?!

 

[westward10]

I know every now and then someone latches onto it. Started in 2012!!

 

[Tom morgan]

has anyone done applications of pneumatics and hydraulics? stuck on tma1 q4 and q7 about modifying the circuits?

 

[AyresomeBoro]

Hello mate I have been stuck on the EEP Module for quite some time now, I have made a start but was just wondering if I could get you to check to see if I’m on the right track as don’t want to submit it and get a wrong mark
[automerge]1567268019[/automerge]

Lighting unit is easy

I can’t find the Lighting unit on the online shop or in the module list I was originally provided with. Do you have to request it?

Cheers.
[automerge]1568474567[/automerge]

has anyone done applications of pneumatics and hydraulics? stuck on tma1 q4 and q7 about modifying the circuits?

Completed Q1 so far, I will be tackling the rest next week.

 

[Zerax]

has anyone done applications of pneumatics and hydraulics? stuck on tma1 q4 and q7 about modifying the circuits?

I did that one last week ! Luckily my spare was good and I managed to change it at the roadside...

 

[Tom morgan]

unsure what you mean?

I did that one last week ! Luckily my spare was good and I managed to change it at the roadside...

 

[GTomlinson]

Hi Guys,

I have just started my HNC having completed the FME maths.

Jumped straight into PLC (seemed like a good idea at the time). I have followed most of it reasonably well but have come across a few questions in the TMA which I am strugglinging with.

Is anyone else on the PLC or who have completed recently who may be able to offer any advice?

Thanks

Graham

 

[Andrew Ryan]

Hi,

I completed the PLC TMA1 with a distinction.

If you still require advice, just ask.

Also, an excellent resource for the HNC and HND is Physics Forums:

Engineering and Comp Sci Homework Help Forum

Free Engineering, Computer Science, and Technology homework help via qualified mentors. Please use the template when requesting help and show your work.

www.physicsforums.com

 

[sam400]

Hi guys, just applied for this course and they said I have to do the maths bridging module first? Did anyone else on here have to do it?

Perhaps I shouldnt mentioned I am an electrician ?

Cheers

Sam

 

[GTomlinson]

Hi guys, just applied for this course and they said I have to do the maths bridging module first? Did anyone else on here have to do it?

Perhaps I shouldnt mentioned I am an electrician ?

Cheers

Sam

Yes I did it

 

[GIZZY]

Has anyone done DCS who can point me in the direction for the TMA's?

Regards

 

[JC10573]

Is there anyone out there that can help me with EEP 3? Complex waveforms are killing me!
thanks in advance

 

[GIZZY]

struggling on DCS TMA1 question 3

Produce a sketch to show the construction of the data words on the data highway.

any help is appreciated.

Kind Regards

Gizzy

 

[lesterwyatt]

Hi There. A bit about myself, Im a time served electrician self employed for around 20 years. As time went by the knees started to play up, so hung up the tools and started working for a large electronics manufacturing company working as an electrical safety engineer. My qualifications as it stands are: 2330 L3, 2394, 2395, 18th, 2919, 2377. I have always wanted to undertake the HNC, but with work and family commitments back then, I put it on hold. I am now 41 with grown up kids and a little spare time. I approached my company and asked if they would support me financially through the HNC, and they agreed. I contacted Teesside to undertake the HNC via distance learning. I have been accepted on the course but you have probably already guessed it, ill have to complete the bridging math course before i can start the HNC. I have been given 6 months to complete this math course. My question is, how long did it take you guys to complete the bridging math course? I enjoy maths but its been a while. I did a GCSE equivalent higher paper through the OU around 5 years ago (just so i'm up to speed when it came to the kids maths home work)

 

[Connor Mennell]

Hi There. A bit about myself, Im a time served electrician self employed for around 20 years. As time went by the knees started to play up, so hung up the tools and started working for a large electronics manufacturing company working as an electrical safety engineer. My qualifications as it stands are: 2330 L3, 2394, 2395, 18th, 2919, 2377. I have always wanted to undertake the HNC, but with work and family commitments back then, I put it on hold. I am now 41 with grown up kids and a little spare time. I approached my company and asked if they would support me financially through the HNC, and they agreed. I contacted Teesside to undertake the HNC via distance learning. I have been accepted on the course but you have probably already guessed it, ill have to complete the bridging math course before i can start the HNC. I have been given 6 months to complete this math course. My question is, how long did it take you guys to complete the bridging math course? I enjoy maths but its been a while. I did a GCSE equivalent higher paper through the OU around 5 years ago (just so i'm up to speed when it came to the kids maths home work)

Hi Lester,

Welcome to the group and best of luck with the studies ahead!

I helped my work colleague through his maths bridge (I fortunately didn't have to do it for mine!) it is aimed I'd say just higher than gcse maths. You do a bit of stuff with algebra, trigonometry, calculus (hardest thing you might not have done) and statistics I believe. We smashed through it in about a month to 2 months and that was solely him with a little bit of guidance from me when it came to the TMAs. The lesson notes are very good and will easily get you through it!

And regardless you have a good group here who do try to help each other out so any issues just give us a shout. I'm quite active on the forum so feel free to message me.

Connor

 

[Othniel]

struggling on DCS TMA1 question 3

Produce a sketch to show the construction of the data words on the data highway.

any help is appreciated.

Kind Reading

Gizzy

Hi Gizzy.

I copied the table from page 19 of lesson 3 and got the mark for the question.

Hope this helps.

Othniel

 

[GIZZY]

Anyone completed DCS Assignment 2, Question 5?

Using the information below, produce a set of calibration figures for the control loop TICA1945.

T11495 Range = 100 to 420 degrees c
TICA1495 SP = PV = 300 degrees c
TCV1495 = 30%



Struggling with this one can’t find anything similar in the lesson material.

did you complete this question? currently can't find anything in course notes

 

[lesterwyatt]

Hi Lester,

Welcome to the group and best of luck with the studies ahead!

I helped my work colleague through his maths bridge (I fortunately didn't have to do it for mine!) it is aimed I'd say just higher than gcse maths. You do a bit of stuff with algebra, trigonometry, calculus (hardest thing you might not have done) and statistics I believe. We smashed through it in about a month to 2 months and that was solely him with a little bit of guidance from me when it came to the TMAs. The lesson notes are very good and will easily get you through it!

And regardless you have a good group here who do try to help each other out so any issues just give us a shout. I'm quite active on the forum so feel free to message me.

Connor

Hi Connor.

Thanks for message. I have just purchased the foundation maths from Teeside. I'll give you a shout if i get stuck!! cheers Lester

 

[Connor Mennell]

Hi all,

Anyone done Microprocessors module? Just need a bit of guidance of where to start with TMA 2.

Cheers eets!

Connor

 

[GIZZY]

Hi,

Currently looking for my last module before the project.

I have completed: pneumatics and hydraulics, DADC, ES, DCS, EEP, AME.

Looking for an relatively easy module so I can complete it quickly.

Kind regards

Gizzy

 

[lesterwyatt]

Just finished the maths bridging course. Not bad at all, really enjoyed the calculus part.
It seems a bit like a ghost town on the student forum at teeside, seems like i was the only student on the course!. Have not heard from anyone not even the tutor. I feel that i'm in for a shock (hnc course), the maths on the bridging course, i would say was GCSE higher paper with a little basic calculus. I submitted the three TMAs lats week and not heard from anyone, how long does it take before i can start the HNC after the maths course? really keen to get this started.

 

[Connor Mennell]

Just finished the maths bridging course. Not bad at all, really enjoyed the calculus part.
It seems a bit like a ghost town on the student forum at teeside, seems like i was the only student on the course!. Have not heard from anyone not even the tutor. I feel that i'm in for a shock (hnc course), the maths on the bridging course, i would say was GCSE higher paper with a little basic calculus. I submitted the three TMAs lats week and not heard from anyone, how long does it take before i can start the HNC after the maths course? really keen to get this started.

Takes on average 1 to 3 weeks to get assessments marked to be fair. The forums are dead, ones like this and there's a good Facebook one which are much more active. You can literally start the next module as soon as they confirm the bridging module is complete. Just call the engineering team for the course and pay for the first module

 

[sam400]

Just finished the maths bridging course. Not bad at all, really enjoyed the calculus part.
It seems a bit like a ghost town on the student forum at teeside, seems like i was the only student on the course!. Have not heard from anyone not even the tutor. I feel that i'm in for a shock (hnc course), the maths on the bridging course, i would say was GCSE higher paper with a little basic calculus. I submitted the three TMAs lats week and not heard from anyone, how long does it take before i can start the HNC after the maths course? really keen to get this started.

Hi Lester,

ive just started the bridging course,so far not too bad!

what HNC unit are you going to do first? I am thinking it might be a idea to get the maths one out the way

Sam