-
Please checkout the new poll we will be pushing hard, and want some good stories to come out of this
result are public - you can change your vote over time, which might genuinely be the case from time to time.
Questions and electrical advice in the Electrical Appliances Forum - Electrical appliances and white goods forum. Washing machine repairs, tumble drier repairs, fridges and freezers that have seen better days and need a decent spark to sort them out..
Some popular forums: Electrical Forum - Electrical Wiring, Theories and Regulations - Periodic Inspection Reporting & Certification - Electrician Jobs
The oven locked itself and the door so I had to turn off the power and can now open it again. Only thing is the oven is no longer heating up at...
I have a Bosch DKE995EGB cooker hood that has stopped working completely - no lights or fan. I've confirmed power to the control module and...
18 months ago I bought American style fridge freezer (this model). I have a two year warranty. I have already had two call outs to replace a...
Hi All,
Thank you for your previous advice - it resulted in us replacing our precious Smeg range with a Hotpoint; however we now have a new issue...
Can someone provide information on where to find an interpretation of the letters/numbers associated with Neff Appliance Model Numbers?…my...
Intermittent fault with a Hotpoint oven .Sometimes comes up to temperature,more often now,it doesn't.Other functions work fine,grill etc.Any thoughts?
The drum is hanging down. I googled the problem and its seemed that the bearing needed to be replacement. However, I am unable to find this...
Hello,
I bought an air conditioner 24000 btu Inverter. The indoor unit makes strange noises/sounds at night.
The pattern is as follows:
First...
Hello. I will be buying new apartment to live. But electrical plugs are older. Not the newest.
And my question. It will be fine to plug pc in this...
Can I run a 7.3Kw induction hob off of 2 x 16 amp circuits single phase I'm not sure what size cable is installed, I will check.
Would I be be...
Good morning all,
I have a 2500W Vax pressure washer, almost 3 years old, but only light summer use, could be described 'as new'. Pressure washing...
I am having a debate with my son-in-law. He has got a Samsung dv80ta020ae heat pump tumble dryer, I am using a 300w de-humidifier for drying...
Hi, my CDA FWC303 wine fridge is knackered. The compressor doesn't start and I've traced it to the PTC which I plan to replace and have identified...
Hi,
We’re having problems with our Bosch serie 6 washer/dryer.
It’s about 6 years old. The model number is WVG30461GB/03.
It has begun to stop...
No information from Ninja customer service. All they want is to sell a new one with discount and scrap my machine which is barely 2 years old.
Hi,…
Is the N50 Series of Neff ovens a replacement for the Series 3?
and secondly where can I find information on the meaning of the alpha...
Evening, my first post with diagrams knocked up in AutoCAD - hopefully, fingers crossed it doesn't all go horribly wrong! OK, my own kitchen...
Hi everyone. The title should sound crazy enough, but it's what happening in my 72-years old home we've purchased 2 years ago.
I found the crazy...
Hello,
I have an all-in-one washer/dryer unit and it is giving me error codes. I have the manual that describes how to test the various...
I purchased a new-build apartment 10 years ago, which came with a fitted oven and microwave. Both appliances are described by the manufacturer...
Wiring to new dishwasher causes garbage disposal to stop working.
I just installed a GE dishwasher and came across a problem with the...
Hello All
I was hoping for some advice. We have a microwave and recently after cleaning, as soon as the microwave was plugged in, a loud humming...
Hello iv got a beko condenser tumble dryer and there's a box with 3 horizontal lines in it flashing and my dryer keeps stopping and starting...
Hi,
I have a Prima Tumble Dryer which I have had for 5 years.
Just recently, the plug and socket melted. I replaced both and it melted again. I...
I have a towel dryer on an interior wall in my bathroom, wired off the last stop in my loop of bathroom outlets. This thing has been installed...
Hi All,
My 1 and half Smeg cooker recently tripped when using the main fan oven. It was during quite a long period of cooking a roast. We reset...
Hello, don't worry, I have a Samsung WF106 washing machine. It shuts off during operation and the motor rotates correctly at first, but it stops...
Hi
My Kitchen has never had a cooker hood installed.
Where the new hood is going to be situated is some distance from any of the outlets in the...
Our built in oven works fault free with all functions except for the grill which trips a breaker when switched off. Not while being used but when...
Hi
I am looking at where does my dishwasher leaking. I find there is some leaking at the bottom behind but not from the hose pipe inside , since i...
I have Curry's Essential tabletop dishwasher model CDWTT115 for nearly five years.
Earlier this year my machine have stopped running during a wash...
My beko will not run, it attempts to move in both directions with a belt or not fitted also shows no faults in checking with a meter across its...
I recently rewired my laundry room with MC cable, 20 amp circuit. I installed an AFCI/GFCI combo switch. The gas dryer trips it as soon as I plug...
I have a 50 amp circuit going to my camper and a 30 amp going to my water well submersible pump. I want to add a washer and dryer in a shed but I...
Hi,
To give a bit of background, it is a Lincat ESLR9 electric cooker. It is very simple design with two fans and two elements.
Two weeks ago...
Hello ! My Indesit YT M11 82X UK tumble dryer starts, then almost immediately stops.Both Lint filters clean, water tank empty, no error codes...
I have an Adexa dishwaser (7kg EMP.500 under counter style) that fills, heats and empties ok but has stopped working on the wash cycle. I replaced...
I have a small power washer with a two-wire cord and GFCI plug. My outdoor and garage receptacles are on a "house GFCI" circuit, wired in series...
I have by mistake used 6amps C grad MCB on a 2000-watt dishwasher. though I was asked to put 10 amps. but it is running properly.
how it is...
I’m just after some advice as I’m looking to have a stock of self tapping screw and metal. Most would need to be an Inch or less and then some...
Hi.
I have been having a problem with my AEG 7000 Series Washer Dryer (L7WEG851R) tripping my main fuse box over the last week. I am trying to...
Just purchased a new Beko FFP3579W Upright Freezer. It's been running for three days now and I believe the freezer maybe faulty.
The freezer...
Sorry two questions today. We had the kitchen rewired based on existing units, but with a slightly new layout it puts the dishwasher right over...
Hi, new here. Not a qualified electrican. Not wanting to self-instal. Not clueless though.
I have searched on 'induction hobs' here, before...
I've just purchased a second user dishwasher as it was barely used.
The unit is in perfect condition however the salt chamber when opened there...
Hi all. Talented amateur here, stage electrician at school 1971 - 74 and have done much DIY electrical work iover the years, including central...
Hi, I was just wondering if I have a dishwasher on a circuit of its own so I'm looking to put a double socket beside the fused spur in kitchen...
Hello all,
Hoptpoint FDL570 was cutting in and out of power- opened it up and saw this...
Can I replace the burnt out bit rather than replacing...
I’m hoping to find a range cooker buying guide as we are looking to update our kitchen. Does anybody have something that would help please?
when are serrated washers required. Someones told me that only metal painted surfaces require them although I’ve always put them on all metal...
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc
YOUR Unread Posts
-
External Consumer UnitThere are also stainless steel options in that range and not too expensive (comparatively).
- Latest: nicebutdim
-
Best certification softwarehttp://www.tysoft.co.uk/easycert.htm I have used this software for years and find it excellent...- Latest: SparkySy
-
Dodgy trade pictures for your amusement! - 1 Million Views!Looks a bit flip floppy to me.... are they cooking sole(s) on a griddle?- Latest: ipf
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.